Stain and Finishing Oil

from $39.00

Fusion Mineral Paint™ Stain & Finishing Oil is a conditioner, stain, and topcoat combination that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring. This easy-to-use product can be used on bare wood or over previously painted surfaces.

Our Stain & Finishing Oil All in One does just as it says! It add colour, and adds a sealing oil at the same time!This oil is so easy to use!

The pigment in it stains your wood accentuating the grain. SFO is a combination of natural oils and resins that penetrate into wood fibres to create a durable, scratch-resistant, waterproof finish. It does not leave a surface film that sits on top, but instead soaks into and becomes a part of your wood. Over Fusion Mineral Paint™, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.

Stain & Finishing Oil is available in Natural (no pigment), Golden Pine, White, Driftwood (grey), Cappuccino, and Ebony for all your wood stain needs.

Use the Natural color over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect.

Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 litre of comparable stains, giving you 2-3 times more coverage than water-based stains.

Please keep in mind that all oil based products typically yellow in time. Using this over top of a white paint, will cause a slight yellowing effect.

www.fusionmineralpaint.com

Size:
Colour:

Fusion Mineral Paint™ Stain & Finishing Oil is a conditioner, stain, and topcoat combination that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring. This easy-to-use product can be used on bare wood or over previously painted surfaces.

Our Stain & Finishing Oil All in One does just as it says! It add colour, and adds a sealing oil at the same time!This oil is so easy to use!

The pigment in it stains your wood accentuating the grain. SFO is a combination of natural oils and resins that penetrate into wood fibres to create a durable, scratch-resistant, waterproof finish. It does not leave a surface film that sits on top, but instead soaks into and becomes a part of your wood. Over Fusion Mineral Paint™, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.

Stain & Finishing Oil is available in Natural (no pigment), Golden Pine, White, Driftwood (grey), Cappuccino, and Ebony for all your wood stain needs.

Use the Natural color over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect.

Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 litre of comparable stains, giving you 2-3 times more coverage than water-based stains.

Please keep in mind that all oil based products typically yellow in time. Using this over top of a white paint, will cause a slight yellowing effect.

www.fusionmineralpaint.com

Sizes Available : 237 mL (8.01 fl.oz.)

Colours Available : natural, golden pine, white, driftwood, cappuccino, ebony

Base : oil

Coverage : approx 40-75 sq ft (depending on wood density)

Finish/sheen : satin to gloss

Uses : use as a stain over raw or well-sanded wood; apply over painted surfacce for added sheen, glaze effect, or added protection; seal milk paint or other porous paint

Benefits:

Easy to use

Very durable

Low VOC

Low odour

All-in-one product: no conditioner or topcoat needed

Clean up : wipe up with absorbent rag. Use mineral spirits if necessary

Dry Time : 9 hours approx

Recoat Time : 9 hours approx

Cure time : 10 days approx